SEDD Design Pre Approval
Sharjah Municipality Parking Reservation Approval
RTA Pre Approval
Government of Ajman
DESIGN & APPROVAL
OUTDOOR & INDOOR BRANDING
SIGNAGES
VEHICLE BRANDING
FLAGS & BANNERS
OTHER SERVICES
Outdoor signage is any sign fitted to a building exterior, roadside or open area, and in the UAE it must be built for the climate and approved by the municipality. K.A.T SIGNS designs, fabricates and installs outdoor storefronts, facade signs and freestanding signage across Sharjah, Dubai, Ajman and Abu Dhabi, using marine-grade materials and handling the permits from start to finish.
What is outdoor signage and where is it used?
Outdoor signage is exterior branding designed to attract customers and identify your premises from the street. It has to survive UAE sun, heat, humidity and coastal salt while staying bright and legible day and night. Typical outdoor signs include shopfront fascia signs, illuminated box signs, 3D letters on the facade, projecting blade signs, pylon and monument signs, and building-top branding.
- Retail and mall shopfront fascias
- Illuminated and non-illuminated facade signs
- Projecting blade signs for narrow frontages
- Freestanding pylon, monument and totem signs
- Building-mounted and rooftop brand signs
Does outdoor signage need municipality approval in the UAE?
Yes, every exterior sign in the UAE needs municipality approval before it is installed. In Sharjah, Dubai, Ajman and Abu Dhabi the relevant municipality reviews the design, dimensions and placement, and roadside or high-level signs may also need RTA or landlord and mall approval. The sign must be bilingual English and Arabic, with the Arabic no smaller than the English, and must match your DED trade name. K.A.T SIGNS prepares the technical drawings and bilingual artwork and submits the permit for you.
Approval protects your investment. Installing an unapproved exterior sign risks fines and forced removal. We build permit compliance into the design so your storefront goes up once and stays up.
Which materials survive the UAE outdoors?
Outdoor signs in the Emirates only last if they are built from climate-grade materials. We use marine-grade aluminium for frames, returns and structure so the sign resists corrosion near the coast, UV-stabilised acrylic for faces so colours do not yellow or fade under intense sun, and IP65-rated LED drivers and modules so the electrics are sealed against dust and humidity. Powder-coated and stainless fixings complete a build designed to shrug off the Gulf climate. These choices are not upgrades but the baseline we build to, because anything less simply does not survive a UAE summer, and a sign that fails after a single season costs far more than one specified correctly from the very start.
| Component | Material | Why it matters outdoors |
|---|---|---|
| Structure and returns | Marine-grade aluminium | Resists coastal salt corrosion |
| Faces and diffusers | UV-stabilised acrylic | Colour stays true under UV |
| Illumination | IP65 LED modules and drivers | Sealed against dust and humidity |
| Fixings | Stainless and powder-coated | No rust streaks on the facade |
How long does an outdoor sign take to install?
Timelines depend mostly on permit approval, since fabrication runs in parallel in our workshop. A typical outdoor project follows these stages.
- Site survey and facade measurement
- Design and bilingual EN/AR layout
- Municipality permit submission and approval
- In-house fabrication of the sign
- Access-equipment installation and electrical connection
